I finished the slideshow.

I sanded the arrow, but snapped it in half while shaping it, so I spent a little bit glueing it back together.

I finished the arrow and I hope to work on the hole that the arrow will go through the next time I get to the CCI.

I shaved the wood using a rasp, so the shape of the wood was much better. I started working on an arrow.

I found a stick to make my arrows with, and I worked a little on my slideshow.

I attached the bow string, and then seeing that the wood was way too thick, I used sandpaper and a rasp to thin it a little.

I finished the notches for the bow string, and worked a bit on the curvature of the bow.

I worked on my slideshow.

I used a dremel to refine the shape of the bow.