Today in middle makers I finished outlining and cutting out the edge of our arena.

I made the prototype for the box and started laser cutting

 the finel.

I have decided to change part of the project. I realized the foam base for the build would not work for the shape of the map that I am making so I have decided to make the base payer through taking paper and tracing the border and the map and make the mountains and castles out of either clay or cardboard. 

https://www.youtube.com/watch?v=WIwlLVGXXzo

Easy Beginner Dinosaur Tutorial.
Using CCI Macbook #5

1st Day of posting the progress of my project. Today, I made a sketch of my plan and ideas. My photo of the sketch is attached to the response.

Today, I also spent some time filling out the cast in iMovie, and figuring out where different scenes should go.

This post is dedicated to the work that I did during last period on Monday 2/28/22. In Middle Makers today I worked on the arrow that I was making. What I had at the start of class was a stick with a jagged tip. I sanded that to make it smoother and sharper. Then I looked at the quiver that Chuck was working on. It was way to big compared to my arrow. So, I combined another thin cylinder to the tip of my arrow to double it's size. Then it was too big so I had to use an utility knife to cut a bit of it off. Then, I spray painted the whole thing brown because that is the color of the arrows in Ranger's Apprentice. Then I hot glued fins to the end of the arrow. This is what it looks like now:

This post is for 3rd period on Monday 2/28/22 in English class. I started to think about what I was going to make. We decided that I would make the bow and arrows. I started making the arrows by first estimating about what shape and size it should be. After about 20 minutes I started to work on the arrow. The first thing I did was I took a thin wood cylinder and started to think about the ways of turning it into an arrow. So, after some time I decided to use a utility knife to sharpen and make a point at the end and then sanding it. I used the rest of class to try and execute that and help Chuck make a quiver. At the end of class I had sharpened the arrow but had not yet sanded it. 

This is the handle