What I am trying to make is a realistic hammer and shield that are the two items of thor that are said to be the only things that can end Ragnarok.

Precedents conceptual

Dragon smithy

Precedents technical

Sketch

On the first day I Gathered my materials and thaught about what I would do

On the second day I made my first prototype. I made it out of cardboard and put a hole on the bottom of the hammer for LEDs

On the third day I added a wheel and made some lines so when it spins it looks cool and added a button and a motor to turn it on. I also made a door to see the inside. (The button is the green dot)

Button

I made A laser cut for thors hammer file with SVG on the fourth day (grandparents day)

(did not use)

I made a laser cut file for both halfs of the shield and Made an x on the shield for design on the fifth day and added a bit of yarn on

I made a pad on the 3d printer for the inside of the shield on the sixth day out of tpu filament

TPU filament is a filament primarily made from thermoplastic polyurethane

On the seventh day, I hot-glued the two parts of the shield together, and I added yarn so it would look medieval. I also made an adjustable strap for your hand and put Thor's face on the shield. I also put a pad that was 3d printed so you do not get splinters. And sanded down the PVC pipe so much it feels like fabric

3d printed

On the eighth day I added yarn on the handle to look medieval and made a strap so you can carry it. I it looks cooler healso put some more dots on the wood so it looks cooler when it spins and substituted the old motor for a stronger one So it spins faster

On the ninth day I added some design to the shield and used a higher quality string

Norse symbol

On the tenth day I added a wight so it could stay on one side and I also sanded down the edges

on the eleventh day I made stands for each artifact for fessy con

Final Picture

Pegs

Final picture with stands

Hammer

shield

Hammer Final Gif

Spinning

Shield and Hammer