This is my first sketch and I am planing to make a Diorama with a 3-D Printed Castle and it will have two mountain ranges and a fence and fake snow.
Day 1
This is my 3-D Print of the Castle.
Day 1
This is my final Castle for the project and I will hot Glue them
Day 2
DAY 3
Today I built a Acrilic box to have my project in but it's to small so I will make a new,
Day 4
Today I made another 3D - print and It was a crown. My crown represents the King and Queen of the Castle.
Today, I made the most important part of the Diorama because I made the base of it. It is out of cardboard and I am going to paint it!
Day 5
DAY 6
Today I started to paint the bottom black because the theme of the book is dark and scary
Today I painted the top purple and I made a little river because in the book, there is a river in front of the Castle
Day 7
today I finished the Diorama but I still have to make an LED around the top
Day 7
:rotate(0)/nuvu-camera-sync-production/fessenden/78d83f0269bf031976a39528d9ecc7ca4ecbbd2767db57848b9f316f8addadcc/DSC_2425.jpg)