Today me and my partner created the 3rd print for the balls, and we made the laser cut for the chest itself. We also took a picture of our sketch.
Day 1
Day 2
What we did today
Today we built the base and the outside of the chest. We also made the top of the chest, and used a big hinge to combine the top and bottom.
What we did today.
Today we made the inside of the chest which will hold the balls in place. also we started printing two of the three balls but since they haven't printed yet this is a picture from tinker-cad.
Day 3
Day 4
Today me and Daniel lowered the stilts that hold the ball holder because the top couldn't close cause of the size of the ball. After that me and Daniel painted the golden snitch that we 3d printed. After that at guided study I made a box in the the cover of the box and hot glued the snitch into it. and after all of that I painted half of the box brown.
Day 5
Today I finished painting the box and at the end of class I sublimation printed a sticker of the logo that's going to go on my box. And I glued the golden snitch into the box.
Day 6
So today since the hinge of the chest was loosening up a lot we decided to remove it and, sand it so that tomorrow we can freshly hot glue it. Also today I put the last ball on the printer so tomorrow it should be ready for painting. And lastly me and Daniel painted a fresh coat of paint on the chest.
Day 8
Today me and Daniel started painting the stripes and we painted half of them.
Today Daniel and I finished painting the stripes/checker pattern. And all we have left to do is put on the stickers.
Day 9
Today me and Daniel repainted one of the balls more brown so it could match the color of the other one.
