These are the foam dagger blades that I will glue together to make the blade

This is the dagger blade after Glueing the two sides together, I have to smooth it out then make a hilt.

I started using a Dremel to"sharpen" the blade

This is a start to one of the drawings I am making of luna and different scenes.

I might add more but idk yet.

This is One of my finished drawings.

This is the second drawing finished product. It is of the Lunar sunrise and it shows the sun Rising from behind the earth fighting back the darkness. I also added an armchair and a velvet bench under the window because that was how I imagined Levanna's Viewing room.

I still need to shape it more though.

These are the main tools I used to make my dagger. Top Right is a Power Plainer, I used that to smooth and taper the handle a little. Then to the Right is a Utility knife, I used that to cut the foam, Then in the bottom right is A dremmel, I used that for shaping the foam to detailing the handle. Then Finally in the bottom right There is a Drill I used to drill the hole for the handle to go on the blade, then above that is a Level to make sure I was drilling straight, and Then, FINALLY (for real this time) you can see various types of clams in the photos.

I used a Dremmel to "Carve" out grips and designs. As you can see, I clamped down the Dremmel and rotated the Handle. I also used a rubber band to Guide the rings