The first thing I did today was print out my chimney sweep brush part. After printing it out, I had to clear all of the supports in the holes. Then, I spray painted it silver. I was also able to get the wire I need to put in the holes.
Day 6
I also worked on my stand today. I was able to draw a face on my 3D printed Nan. After that, I glued her to the stand. I also made a little sign to show what the project is. Some of the glue was looking messy, so I used a heat gun to heat up the glue and wipe the extra away.
Day 6
:rotate(0)/nuvu-camera-sync-production/fessenden/2abd4c2519b344b97249d8674e10b34ff335c18f585c025ed6485b6b75972b1b/DSC_2877.jpg)
:rotate(0)/nuvu-camera-sync-production/fessenden/83419b1ef995d56c4b85539c43f66199a570d512c0131f0807bf8d78b5987546/DSC_2886.jpg)