I also worked on my stand today. I was able to draw a face on my 3D printed Nan. After that, I glued her to the stand. I also made a little sign to show what the project is. Some of the glue was looking messy, so I used a heat gun to heat up the glue and wipe the extra away.

Day 6

For my project, I will make a few things. The first thing I am making is a model chimney sweep. I am also making a stand for the sweep. Lastly, I will have 2 3D models of my characters that will rest on my stand. I am putting all of these things together because I feel that the chimney sweep was an important thing to Nan and Charlie in the story, so I should include them in my project.

Project Description

This is my conceptual precedent. It shows another chimney sweep that I want mine to look similar too.

Conceptual Precedent

Technical Precedent

I chose this for my technical precedent because it is a video I watched that helped me get some information and help on the best way to attach 3D prints to different materials.

This is my additional precedent. I got inspiration for my stand from this because it has a base and 2 grips that the item rests in,

Additional Precedent

Today I made my first sketch of the project. This shows every part of my project. With the brush, the stand, and the 3D models. I will start making it tomorrow.

Initial Sketch

Day 1

The first thing that I did today was make the file that will be sent to the CCI to make my stand. Here, you can see the base of my stand and the 2 grips that will hold the brush.

Cuttle Stand Components

Day 2

The other thing I did today was start to make the characters that will also rest on my stand. These will be 3D printed, and a small but cool addition to my project. On the left you can see the golem named Charlie and on the right you can see Nan. These will most likely be 3D printed tomorrow.

3D Printed Characters

Day 2

Today I did a few things. I made a lot of progress on my 3D figures by printing them and clearing the supports. I also worked on my stand and laser cut the pieces, as well as put them together.

Day 3

Today I did a few things. My handle piece came in, but it wouldn't fit in my grips. I fixed this problem by sanding down the grips so it would fit. I also painted my 3D characters.

Day 4

Today I worked on the brush. I plan to 3D print it out, paint it, and then feed wire through the holes so it looks like the top of a chimney sweep.

Day 5

The first thing I did today was print out my chimney sweep brush part. After printing it out, I had to clear all of the supports in the holes. Then, I spray painted it silver. I was also able to get the wire I need to put in the holes.

Day 6

Day 6

I also worked on my stand today. I was able to draw a face on my 3D printed Nan. After that, I glued her to the stand. I also made a little sign to show what the project is. Some of the glue was looking messy, so I used a heat gun to heat up the glue and wipe the extra away.

Day 7

Today I did a few things. The first thing I did was put all of my wire through the holes in my brush. I think it looks pretty good. My chimney sweep handle also dried after I painted it. It looks pretty good. Tomorrow I will get more wire, cut it and put it on.

Day 8

Today I spent a lot of my time In the art room. Before I could do that, I finished putting the wire into the 3D print. Although, I accidentally stabbed myself with the wire and had to take a break. Later, I went to the art room to paint soot looking marks on my dowel and brush.

Final Project

Thanks For Listening!

By Nolan Del Papa

3D Printed Charcters

The other thing I did today was start to make the characters that will also rest on my stand. Theese will be 3D printed, and a small but cool addition to my project. On the left you can see the golem named Charlie and on the right you can see Nan. These will most likely be 3D printed tomorrow.