I got the images for the board of the game. There are so many I can only show a few, or else this presentation would be like 20 pages long
DAY 2
I finished my sketch and proposal, and got approved!
DAY 3
I have some foam board for the board of the board game, and I am making a Google Doc of the images to print.
DAY 4
Gimli and Gandalf came to school today! They are some of the set pieces. The Axe Chariot will be a travel vehicle in certain areas of the board that Gimli can summon. It is an add-on that you can use if you own the Gimli fun pack for LEGO Dimensions. more images on next 3 slides
some of the cards have been made!
DAY 5
ALL CARDS HAVE BEEN MADE!!!!!!!!!!!!!!!!!!! I have finished making all the cards for my Lord of the Rings/The Hobbit Board Game. Some are on previous slide
I worked on my Mid-Review. You can see it on my project page (from which you are likely seeing this from)
DAY 6
DAY 7
I have cut out most of the cards and images have been printed! Official rules are done as well
DAY 8
The board is finished! I am getting the image tomorrow. I also have fully cut out all the cards! Tomorrow I also plan to play the board game with some of my classmates.
DAY 9
Here is the board
DAY 10
I have finished my board game. The rules are being printed out and 2nd period tomorrow I plan on playing my board game with some other kids.
DAY 11
I test played it and it was really fun!
DAY 12
Realized I never put in pictures of the printed cards and game rules
Here is the final images! Yes I'm aware it's sideways.
Today I created my first sketch. This is my castle, I know that it is hard to see, but if you can you know that there will be an action theme that I might have to use lego pieces though.
Day 1
Day 2
Today, I worked on my building which involved building stairs and improving the balance of my castle.
I made a plan for my Fessy Con project with a sketch of the idea that I came up with. My plan is to create a 3D map/board game. I can 3D print some characters from my book, and they will move on a board with a spinner in the middle.
Day 1
Day 2
I created a 3D figure on TinkerCad, and I am trying to figure out how to make more figures faster. The details were hard, but I managed to finish my character named Jason. I am going to work on a different character named Piper next.
Day 3
I finished my second character on TinkerCad, and I figured out a fast way to make these characters. The last character is going to be the easiest. I only needed seven items for this character! My first one likely had over 30 items. This shows how much more efficient it was to create this character.
Day four
I realized that I only have to make the weapon to represent each character. I noticed that all of my characters are very complicated and don't even look very good. Using their weapon represents the characters while making it look good.
Day 5
I created a map for my game with a key, but I will definitely make changes with more details. This is going to be the layout for the game. I will add printed words on top of the words. The big spaces will be used for big structures, and I will decorate everything.
Day six
Sihan let me borrow some of his figures on TinkerCad, and I am 3D printing them. I will choose the best looking ones when they finish 3D printing. It will be the easiest way for me to create 3D characters. All of my 3D prints have not came out very well. So, this should be a step up.
day 7
I added a few buildings for my project. This includes a grey building and a mountain. I also added some squares for my board game.
Day 8
I finished by making my 3D printed figures. I also filled in the squares and added some amazing decoration. Most importantly, I finished my project.
Today I made my Fessy Con sketch of my card game and what materials I needed. I will use cardstock paper and print my card design on it. I will make my designs on Google Docs using internet images. I won't need CCI materials for my project. I will need a teacher to use the paper cutter, and I will print my card designs on cardstock paper, which they have in the printer room.
Day One
Today I started making cards for Fessy Con project, I spent some time working on it in Middle Makers and in English class. I just googled the images of the characters, and wrote a description for them.
Day Two
Today I made two new cards for my Fessy Con project. I've seemed to run out of the cards I can just google the characters. Tomorrow I will start looking up stock images of characters, and places.
Day Three
Day Four
Today I made a new card and also printed out my first cards on regular paper. I looked at this just to see how it would look. When I looked, I realized that I had to make the font a different color, I also needed to put less cards on each page. So I fixed both of those in the document by putting two cards on each page, and changing the font to white.
Today I spent getting half of my Mid-Review done and fixing errors in my cards. Next week I will start printing cards starting Monday. I will also finish the Mid Review Monday.
Day Five
Day 6
Today I started work on moving my cards from Google Docs to Google Slides with the help of Miss Cook. I did this to make everything more even, because my cards were all different sizes.
Today, I glued the back of my cards designs to back of the front of my card designs, which Miss Cook printed out and cut for me. I plan to cut out the uneven parts with siccors tomorrow, and then get it laminated.
Day 7
Today, I laminated the cards, I also started gluing the second round of cards, which I plan to finish this weekend. Miss Cook and I are just going to cut the cards when they are laminated.
Day 8
This weekend I designed four new cards. This week, I plan to glue and laminate them. I will also make a set of rules for my game.
Day 9
Today I laminated the cards I glued last weekend. I also printed and glued the cards I designed last weekend. Tommorw they can be laminated in homeroom. Tomorrow, I also plan on printing a set of rules for game, which I will make in Study Hall and print and laminate during recess.
Day 10
Today I laminated the last cards, and I printed a laminated a set of rules for Half Upon a Fish. That means I'm officially done with Fessy Con!
Today i made my sketch of my project. Next class I will make a materials list.
Today I made a materials list. I sent it to Ms. Cook and Mr. Lew. Next class I will start my shirt.
Day 3
Today I made a logo on cuttle next class I will put it on a shirt.
Today I finished my logo. I also started working on gathering pictures for the the stickers. next class i will sublimate the shirt and make the stickers.
Day 5
Today I made my shirt. Next class I will make the cube stickers after I finish gathering images.
Today I finished gathering images. Next class i will make the stickers.
Today I tried to make the stickers but the sublimation printer was not working.
Today I made the stickers. Next class I will apply them. I had a picture but the camera deleted it and I have already applied them.
Today I applied the stickers and made a sign. Tonight I will 3D print some keychains as a final piece of the project.
:rotate(0)/mw8v2co0ytn9ub4asx0s4ml08wf3)
:rotate(0)/tl5xvihgusqe873dcpfxmvdfpzsj)
:rotate(0)/nuvu-camera-sync-production/fessenden/a013bb63cb66e33810d4d350f6ba5369c36527f99019f5f6da67712fe73b914d/DSC_3205.jpg)
:rotate(0)/xsnl6rw6sziyoe0c1kee52ekrl5h)