Day 1 my idea

This is my idea that I have to make my project

Day 2: This s My conceptual precident aka where I got my idea with

Day 3:This is my board that I made with all the special stops and boosts

Day 4: I made a the turf and the sea areas

Day 5: I made the half of the model magic for one quarter of the board.

Day 6 I made the forest for the land area.

Day 6: I added the jail that they got into and i colored in some of the mud.

I will create a board game, the purpose of my board game is to find the sword(treasure search). This will relate to The Sword of Summer by Rick Riordan.

Problem/Solution and Introduction

Precedent

My precedent is the Sword of Summer. We need to find the sword to win the game.

Conceptual

technical

Initial sketches

This is my initial sketch.

On day 6, I worked on the mid-review project.

Final Project

I am planning to make a helmet. It relates to my book, Artemis Fowl because there is a magic police force called the LEP, and one of the main characters is part of it and I am making her helmet.

These are my precedents:

This is a prop from the Artemis Fowl movie. It is my conceptual precedent because it is exactly what I am trying to make.

This is my technical precedent. I am using the template it gives in the video and just not adding the front face part. I am also making it out of foam instead of cardboard.

This was (part of) my first sketch on day 1

My idea is to make a helmet out of foam, then cut and glue the foam to make it.

Day 2

I got the foam for the helmet. Now I am going to start trying to figure out how to make it. Science Bob used to do the same when making other helmets, so I am going to see if any of the CCI staff know how.

Work Day 3:

Ms.Cook sent me two links for a DIY helmet and I think I am going to use the second one, just cutting off the front part:

https://www.youtube.com/watch?v=dQw4w9WgXcQ

https://www.youtube.com/watch?v=FljBNbYO5EA

Work Day 4

I made the first half of the first iteration out of cardboard. I am going to start to make the other half, then make it out of foam for the final!

Work Day 5

I cut out the other half of the first iteration of the helmet

It was not really work day but I still worked on it in Middle Makers:

I finnished the other half of the prototype helmet and I am going to glue them together next time.

Work day 6

Today I cut out the first half of the helmet and started gluing it together. Sadly I couldn't finish or take a photo. :(

Work day 7

I finished the other half, glued it together, and got green and gray duct tape on it because there was no time for paint.

Work day 8

I made a rough laser cut of the visor, heated it up to 500°F, and bent it to the desired shape. Sadly, I couldn't get it on the helmet.:(

Work Day 9

I got the visor on the helmet, but I realised that I couldn't get the tint on, and they are out of LEDs so I don't think I can get them on either.:(

FINAL DAY

I finished the helmet!

My main idea is to make a board game that includes many aspects of The Red Pyramid but in a competitive way, to show the meaning and story.

A base idea for this project is Candy Land or Chutes and Ladders, where the main idea is to get to the end before your opponent.

I started to bring this idea to life on Cuttle by designing it for a laser cut.

This was my original sketch for the game that I made on day 1, however as you can see it has changed a lot till now.

Iterations!

On Days 2-3 I designed and created my first iteration for the board, which was to only make the hieroglyphs in the corners laser cut, and make the path marker.

However, after day 3 I quickly realized that making it so everything on the board is laser cut would look a lot more neat and overall better, so I designed and laser cut it on day 4.

On top of that I also changed many things since my original. One example of this is that I decided to use dice instead of a spinner. I also had to redo one of the playing pieces because it was too big for the path.

By day 6 I had upgraded my board a sufficient amount. I added a 3d printed pyramid and added the bottom part of my board.

In my final iteration on day 7, I added on the bottom part that I had planned in the beginning and I made cards.

Thank you!

I plan to create a dog bowl that will represent one of the artifacts from the book Survivors the Lost City.

Conceptucul Precedent

My abstrat idea is to build mini artifacts with a main artifact as the center piece with smaller artifacts on the side. With a dog bowl as the center.

Technicail precedent

This is my technaicail precedent. My tehcnail precedent is this image which is a image of a dog cage which I am making a mini version of.



Sketches

Iteratoins part two

Thanks for watching any questoins?

Final project

I will create merch. It will be based off of The Hunger Games by Suzanne Collins.

Technical precedent

Conceptual precedent

Additional precedent

Day 2

We plan to create a chest

that will relate to Harry Potter because it shows the chest for Quidditch.

Day 1

This was the scetch that we used to get an idea of what our project should look like.

Conceptual precedents

Technical Idea

Thank you !!

It is a paper mache hand that will slide out of an LEDed portal

This hand represents the consequences of your actions because Coraline made a bad decision

My goal is to create a representation of the book Coraline by Neil Gaiman

Conceptual Precedent

My conceptual precedent is for the wooden base. I liked how the hand stood out visually against the brown color.

I got my Technical precedent from this picture because I thought I could make something out of paper Mache.

Technical Precedent

I found this video about how to make paper Mache

Paper Mache is a way of making something by pasting thin strips of paper on to a frame something.

To do it you dip the paper into the paste and then plaster it onto the frame to make what you want.

Sketch

Before I decided to make the base out of wood this was going to be the 3d print.

This figure was made in Tinkercad

Iteration 1

This is my first attempt at making a box to slide the hand through, but it was too small.

Box iteration 1

This is the start of my wooden base.

Base Iteration 1

I used popsicle Stikes to make it then glued them together.

This was my original idea for the 3D model characters. However, they took way too long, and they look kind of bad. So, I created their weapons on a platform each representing each character, and they look much better.

Old

New

A lot of these letters look messy and I don't want to use this for Fessy Con. However, I have made the decision to put the text that I actually want over these letters and words. This can make my project look a lot more professional. This will be a major change for my project.

My original idea for the board game is shown in this sketch. However, I have changed the look of my characters dramatically. I have decided to only put each character as only a weapon. The weapon used for each character is the weapon that the character uses. I have also created the squares in a completely different pattern to make some structures with lots of space. I also got rid of one structure that I don't need. Most importantly though, I am only building the characters for the quest. I was going to build the monsters, but it is really hard to build all of this when I have an entire board game to build.

My Finished Project