For Fessy Con I will make a board game. It will relate to my book The Forbidden Stone by Tony Abbott because it will display multiple events and obstacles in the book.

My conceptual precedent is snakes and ladders because my board game will have a ladder and is in the same twisty shape.

Conceptual Precendent

Technical Precedent

My technical precedent is a design for my board game box. I decided to make the box out of cardboard or paper(preferably cardboard) and I think that I'll use this design.

This is my initial sketch for my project. I plan to make a box to store the board game using cardboard. The board of the board game is going to be wood. The cards will be paper and I might add a design to them to indicate which pile they are. I also sketched a rough draft of what the squares might be.

Iteration #1

I finished the board design on cuttle. It will be like snakes and ladders; after I print it out, I will add one of the ladders/bridges. I added 2 squares for holding the card piles and the rest are the squares that the players will move over.

These are the card stack piles.

 I started to cut out my board game's order and clue cards. I also cut out my board but I accidentally rastered the middle cut so I'll have to fix that. Another thing that I did was make a cuttle design for my board.

Iteration #2

Iteration #3

I finished cutting out all my game cards for my game. The blue cards are clue cards(good) and the red cards are order cards(bad).

Iteration #4

Iteration #5

Iteration #6

Iteration #7

Iteration #8

Iteration #9

This is the final image showing the cards, board, pieces, dice, and rules.

Day 2

Today I finshed the board design and I will print it out next class. It will be like snakes and ladders and after I print it out I will add some of the ladders/bridges. I added 2 squares for holding the card piles and the rest are the squares that the players will move over.

Today during english class I started to cut out my board game's order and clue cards. I also cut out my board during middle-makers but I accidentally rastered the middle cut so I'll fix that next class. Another thing that I did during middle-makers was make a cuttle design for my board that I'll vinal cut next class.

Day 4

Today I finished cutting out all my game cards for my game. The blue cards are clue cards and the red cards are order cards.

Day 5

Today I finished and reviewed my mid-review presentation. I also looked at board games like Monopoly and Candyland to inspire me. I might try to make my board game box out of strong cardboard if the CCI has it.

Day 6

Today in middle-makers I finished vinyl ing some of the cards. It was very tiring. (I kept having trouble with the transfer paper.)

Day 7

Today during English I went to the CCI and Mr.Lew gave me the idea of using hinges. I finished cutting the board but I accidentally cut it in the wrong spot so the board is a bit messed up. I also attached the hinges but the duct tape didn't work very well.

Day 8

Today during middle-makers I hot glued the hinges but I didn't like the hinges so I took them off. I also make a cuttle of my box. Also in English class, Henry helped me sublimate a crossbow onto my board.

Day 9

Today during English class I cut out my board but I forgot that I couldn't adjust the board after I ungrouped the parts so the cut failed. Now I have to make a new file and cut it again.

Day 10

Today during middle-makers I printed out my box put I got it wrong again. I also printout most of my squares.

Day 11

I finished the other half of my board and finished the script. I also finished writing on my cards.

I plan to create a Go Fish-style card game about my book. This will relate to Half Upon a Time because it will show pictures and descriptions of the characters and places from my book.

Day 1

Today I worked on figuring out how I was going to make the staircase in the house, and I realized that I would have to use foam board for the walls because we cant cut things that big in the laser cutter. To the right is a picture of the current stair 3d model.

Day 2

I made the walls and floor for my dorama. Tomorrow I intend on cutting out the floor for the 2nd floor, thinking about where the rooms will be, and cutting out the roof

Day 3

Today I cut out the door , and I built the first floor walls.I also made the 1st floor plan, and I made the roof. Next I need to finish making the stairs so I can start designing the second floor.

I couldn take a picture

Day 4

Today I designed he stairs. I used Tinkercad to design them and stacked a bunch of 3d rectangles and file the bottom to make it.

This will relate to The Hunger Games because I am making a diorama related to the moment Katniss steps up for her sister and takes her place in The Hunger Games.

How my Diorama will relate to the book

Copyright By Charlie Winchester

Conceptual Precedent

Technical Precedent

My Proposal

By Charlie Winchester

Copyright by Charlie winchester

My Project so far

Last iteration

Final Project

*Added Final Characters*

Thank you for listening!

My thesis for my project is so you can see something from two perspectives. The way I did that is by having one side to be France and one side to be the hotel. The way I did is by 3d printing the hotel and the elevator and getting turf for the France side.

This is my first precedent of and 3d printed elevator.

This is my second precendent of a French field.

This is my first sketch.

This is the day the turf came.

This is the day I cut the turf.

This is another one of my iterations.

This was my final picture.





I am Planning to Create The Legendary War Hammer Aegis-Fang. This Will Relate to The Crystal Shard By R. A. Salvatore, Because it Will Show the True Power of This Legendary Hammer





This is My Conceptual Precedent, Showing What My Hammer is Based On.





This is My Technical Precedent, Showing The Shape and Design of the Hammer.





This is My Initial Sketch, Showing The Different Components Within it.

Iterations





Iteration #1

In this iteration I created a file in cuttle to Laser Cut





Iteration #2

In this iteration I Laser-Cut the File I had and started sanding it





Iteration #3

In this iteration I put together my laser cut peiced and built half of the hammer





Iteration #4

In this iteration I put together the other half of the hammer and fully sanded it





Iteration #5

In this iteration I stained the handle and painted the hammer.





Iteration #6

In This Iteration I added the Leather Handle





Final Iteration

In this iteration I finished the leather grip and I added a stand

My project is a Diorama of Mordor. I decided to do a diorama because the settings in my book are very important, and I thought it would be cool to show a location in my book through my project.

Conceptual Precedent:

Technical Precedent: https://www.youtube.com/watch?v=-lcU_sa32CM

Initial Sketch:

Iteration 1:

Iteration 2:

Iteration 3:

Iteration 4:

Final Iteration:

I am working on a game board that goes through all the places my main character went through to get to her father.

This is an conceptual precedent because I got the idea of making a board game from monopoly.

This is my technical precedent because this shows a version of the type of game I want to make.

Initial Sketch

Thank you for listening

For my project, I will make a few things. The first thing I am making is a model chimney sweep. I am also making a stand for the sweep. Lastly, I will have 2 3D models of my characters that will rest on my stand. I am putting all of these things together because I feel that the chimney sweep was an important thing to Nan and Charlie in the story, so I should include them in my project.

Project Description

This is my conceptual precedent. It shows another chimney sweep that I want mine to look similar too.

Conceptual Precedent

Technical Precedent

I chose this for my technical precedent because it is a video I watched that helped me get some information and help on the best way to attach 3D prints to different materials.

This is my additional precedent. I got inspiration for my stand from this because it has a base and 2 grips that the item rests in,

Additional Precedent

Today I made my first sketch of the project. This shows every part of my project. With the brush, the stand, and the 3D models. I will start making it tomorrow.

Initial Sketch

Day 1

The first thing that I did today was make the file that will be sent to the CCI to make my stand. Here, you can see the base of my stand and the 2 grips that will hold the brush.

Cuttle Stand Components

Day 2

The other thing I did today was start to make the characters that will also rest on my stand. These will be 3D printed, and a small but cool addition to my project. On the left you can see the golem named Charlie and on the right you can see Nan. These will most likely be 3D printed tomorrow.

3D Printed Characters

Day 2

Today I did a few things. I made a lot of progress on my 3D figures by printing them and clearing the supports. I also worked on my stand and laser cut the pieces, as well as put them together.

Day 3

Today I did a few things. My handle piece came in, but it wouldn't fit in my grips. I fixed this problem by sanding down the grips so it would fit. I also painted my 3D characters.

Day 4

Today I worked on the brush. I plan to 3D print it out, paint it, and then feed wire through the holes so it looks like the top of a chimney sweep.

Day 5

The first thing I did today was print out my chimney sweep brush part. After printing it out, I had to clear all of the supports in the holes. Then, I spray painted it silver. I was also able to get the wire I need to put in the holes.

Day 6

Day 6

I also worked on my stand today. I was able to draw a face on my 3D printed Nan. After that, I glued her to the stand. I also made a little sign to show what the project is. Some of the glue was looking messy, so I used a heat gun to heat up the glue and wipe the extra away.

Day 7

Today I did a few things. The first thing I did was put all of my wire through the holes in my brush. I think it looks pretty good. My chimney sweep handle also dried after I painted it. It looks pretty good. Tomorrow I will get more wire, cut it and put it on.

Day 8

Today I spent a lot of my time In the art room. Before I could do that, I finished putting the wire into the 3D print. Although, I accidentally stabbed myself with the wire and had to take a break. Later, I went to the art room to paint soot looking marks on my dowel and brush.

Final Project

Thanks For Listening!

By Nolan Del Papa